Avaya G700 Installation And Upgrades page 211

5 Upgrading an Existing G700 with an S8300 (Primary Controller or Local Survivable Processor):
1. Access the S8300 via telnet
191).
At the command prompt, type cd /tftpboot and press
2.
The /tftpboot prompt appears.
Type ls -l and press
3.
The list of files appears.
Check the list of files to ensure that the version numbers match those of the Release Letter.
4.
Use the following legend to help understand which files are for the different G700 Media
Gateway components.
Note: You are unlikely to need all of the files. If the customer does not have a particular
media module, you will not need to load the file.
Table 12. Firmware File Formats
Component
P330 Stack Processor
P330 Stack Processor
G700 Media Gateway
VoIP Media Module and
Motherboard VoIP
DCP Media Module
Analog Port/Trunk Media Modulemm711<version id>
E1/T1 Media Module
BRI Media Module
Install New Firmware on the P330 Stack Processor (Layer 2 Switching Processor)
Begin
On your laptop, return to the HyperTerm window. At the MG-mmm-n(config)# prompt, type
1.
exit and press
The P330-1(configure)# prompt appears.
Note: If necessary, open the HyperTerm window, and login to the P330 Stack Processor
command line interface.
At the P330-1(configure)# prompt, type
2.
copy tftp SW_image<file> EW_archive <ew_file>
<tftp_server_address> <Module#>
where
<file> is the image file with format and vintage number similar to viisa3_8_2.exe,
<ew_file> is an embedded web application file with format similar to p330Tweb.3.8.6.exe,
<tftp_server_ip_address> is the ip address of the S8300, and
<Module#> is the number, 1 through 10, of the media gateway in the stack. If there is only one
G700 Media Gateway, the number is 1.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
(see"Log in to the S8300 from Your Laptop using Telnet" on page
to list the files.
E NTE R
Firmware Version Format
viisa<version id>
p330<version id>
mgp<version id>
mm760<version id>
mm712<version id>
mm710<version id>
mm720<version id>
.
E NT ER
.
E NT ER
Example
viisa3_12_1.exe
p330Tweb.3.8.6.exe
mgp_3_0.bin
mm760v3.fdl
mm712v2.fdl
mm711v4.fdl
mm710v3.fdl
mm720v2.fdl
211