Configure The S8300 - Avaya G700 Installation And Upgrades

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):

Configure the S8300

!
CAUTION:
Be sure to set the time and timezone first. Failure to do so may cause network problems
later.
Begin
Note: Do not confuse the configuration web pages in this section with the Avaya
Installation Wizard (AIW). AIW is an optional tool for new installations only and
helps you install both S8300 and G700 software. After the initial installation of
software, however, you must modify S8300 configuration with the S8300
Configuration web pages.
Under the Server Configuration and Upgrades on the S8300 main menu, click Configure
1.
Server.
The Configure Server screen appears.
Figure 32. Configure Server Screen
92
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002