Avaya G700 Installation And Upgrades page 188

5 Upgrading an Existing G700 with an S8300 (Primary Controller or Local Survivable Processor):
Select the Properties button.
4.
In the TCP/IP Properties box, click the IP Address tab.
5.
Click the radio button to Specify an IP address , and enter the following:
6.
- IP address: 192.11.13.5
- Subnet mask: 255.255.255.252
Note:
7. Disable DNS service as follows:
- Windows 95, 98, and Me: Click the DNS Configuration tab. Verify that the Disable DNS
radio button is selected.
- Windows NT: Click the DNS tab.
• If any IP addresses appear under DNS Service Search Order, make a note of them in
case you need to restore them later.
• Select each IP address in turn and click the Remove button.
Disable WINS Resolution as follows:
8.
- Windows 95, 98, and Me: Click the WINS Configuration tab. Verify that the Disable
WINS Resolution radio button is selected.
- Windows NT: Click the WINS Address tab.
• If any IP addresses appear for the Primary and Secondary WINS servers, make a note of
them in case you need to restore them later.
• Clear each server entry.
• Clear the checkbox for Enable DNS for WINS Resolution .
Click OK twice to accept the address information and close the Network dialog box.
9.
10. Reboot the system if directed to do so.
Disable proxies in browser
Begin
If you are connecting a laptop directly to the Services Ethernet interface on the S8300 Media Server
faceplate, you must disable proxies as described below.
Note:
188
Record any IP addresses, DNS settings, or WINS entries that you
change. You may need to restore them later to connect to another net-
work.
You may not have to disable using a proxy server if you instruct your browser
to not use the proxy server when accessing address 192.11.13.6 from a
directly connected laptop. Otherwise, you need to remember to turn proxy
usage on or off as needed.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002