Avaya G700 Installation And Upgrades page 29

1 Getting Started:
Table 3. Task List to Install a New G700 (with an S8300 or Local Survivable
Processor) Continued
Task
"Load New Software on the S8300"
on page 82
"Install Software on the S8300" on
page 84
"Configure the S8300" on page 92
"Provide the keys.install File (If Nec-
essary)" on page 103
"Configure the G700 Media Gateway"
on page 105
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
Installation Roadmap and Task Lists
Subtasks (If any)
"Log in to the S8300 from Your Laptop using Telnet" on
page 77
"Log in to the MultiVantage SAT Screens" on page 78
"Log in to the S8300 Web Interface from Your Laptop"
on page 79
"Load License and Authentication Files (from Your Lap-
top)" on page 80
"Install License and Authentication Files (from Your Lap-
top)" on page 81
"Run Save Translations" on page 82
"Determine Necessary Upgrades to the S8300" on page
82
"Transfer Files from a CD or Hard Drive of Laptop" on
page 83
"Set the Time and Date" on page 84
"Install New Software" on page 85
"Make the Upgrade Permanent" on page 90
"Install MultiVantage Patch Files from Your Laptop" on
page 91
"Create the keys file" on page 103
"Upload the keys file" on page 103
"Download or copy the keys file" on page 104
"Set the media server's time now" on page 104
"Connect Your Laptop to the G700 Serial Port" on page
105
"Log in to the Avaya P330 (Layer 2 Switching Proces-
sor) Command Line Interface" on page 105
"Determine Necessary Firmware to Install on the G700"
on page 106
"Assign the IP Address to the P330 Stack Processor
(Layer 2 Switching Processor)" on page 109
3 of 6
29