Prepare For The Upgrade (S8300 As Primary Controller Only) - Avaya G700 Installation And Upgrades

5 Upgrading an Existing G700 with an S8300 (Primary Controller or Local Survivable Processor):
Run Save Translations (Only If New License or Authentication Files Installed)
Begin
!
CAUTION:
This procedure saves the official passwords for the customers system in the MultiVantage
Software. If you fail to perform this step now, you may be irretrievably locked out of the
system later in the installation when the system reboots.
At the prompt in the telnet window, type sat and press
1.
Log in again as craft.
2.
At the SAT prompt, type save translations and press
3.
Prepare for the Upgrade (S8300 as Primary
Controller Only)
Clear Alarms
Begin
On the S8300 main menu under Alarms and Notification, click View Current Alarms.
1.
Select the alarms to be cleared and click Clear.
2.
Resolve any major alarms through the MultiVantage Software.
3.
Back up the System
Begin
Make sure you have the IP address of the customer's FTP backup server.
1.
On the S8300 main menu, select Backup Now.
2.
The system displays the Backup Now screen.
3. Select the type of data you want to back up by selecting the appropriate data set.
Select a backup method, normally FTP, to indicate the destination to which the system sends the
4.
backup data.
Complete the following fields:
5.
User name. You must enter a valid user name to enable the media server to log in to the FTP
server. If you want to use the anonymous account, type "anonymous" in this field. If you do not
want to use the anonymous account, type the actual user name in this field.
Password. You must enter a password that is valid for the user name you entered. If you are
using anonymous as the user name, you must use your email address as the password. However,
the FTP site may have a different convention.
Host name. Enter the DNS name or IP address of the FTP server to which the backup data is
sent. To enter an IP address, use the dotted decimal notation (for example, 192.11.13.6).
196
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
.
E NT ER
.
E NT ER