Avaya G700 Installation And Upgrades page 31

1 Getting Started:
Table 3. Task List to Install a New G700 (with an S8300 or Local Survivable
Processor) Continued
Task
"Administer MultiVantage Software
on the S8700 (When the S8300 Is an
LSP)" on page 129
Review "Considerations for IP
Phones Supported by a Local Surviv-
able Processor" on page 139
"Set Up SNMP Alarming on the
G700" on page 140
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
Installation Roadmap and Task Lists
Subtasks (If any)
"Assign the Network Region to the S8300 Media Server"
on page 125
"Add Media Gateways" on page 126
"Verify Changes" on page 127
"Enable Announcements, If Necessary" on page 128
NOTE: This should only be done if the customer has
specifically requested an immediate enabling of
announcements.
"Save MultiVantage Translations" on page 129
"Assign the S8700's CLAN Node Name and IP Address"
on page 130
NOTE: This assignment should have already been estab-
lished as a part of normal S8700 installation.
"Define the IP Network Regions for the G700 Media
Gateway and the S8700 CLAN Board(s)" on page 131
NOTE: This definition should have already been established
as a part of normal S8700 installation.
"Define the IP Interfaces of the S8700 Port Network
CLAN Boards" on page 133
NOTE: This definition should have already been established
as a part of normal S8700 installation.
"Add Media Gateways" on page 135
"Verify Changes" on page 137
"Enable Announcements, If Necessary" on page 138
NOTE: This should only be done if the customer has
specifically requested an immediate enabling of
announcements.
"Save MultiVantage Translations" on page 138
"Add INADS phone numbers and Enable alarms to
INADS" on page 140
"Configure an SNMP Community String for Traps" on
page 141
5 of 6
31