Avaya G700 Installation And Upgrades page 35

1 Getting Started:
Table 4. Task List to Install a New G700 with an S8700 (No Local Survivable
Processor) Continued
Task
"Set up a laptop for a direct Ethernet
connection (If Necessary for Firm-
ware Download)" on page 159
"Install New Firmware on the G700
Media Gateway" on page 163
"Administer MultiVantage Software
on the S8700" on page 170
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
Installation Roadmap and Task Lists
Subtasks (If any)
"Check Your Version of Windows" on page 160
"Change TCP/IP Properties and Network Settings (Win-
dows 2000 and XP)" on page 160
properties (Windows 95, 98, NT 4.0, and Millennium Edi-
tion [Me])" on page 161
"Disable proxies in browser" on page 162
"Verify That the tftpboot Directory Has the Right Firmware
Versions" on page 163
"Connect Laptop to the Customer's LAN (If Laptop Has
the TFTP Server)" on page 163
"Install New Firmware on the P330 Stack Processor
(Layer 2 Switching Processor)" on page 164
"Install New Firmware Files on the G700 Media Gateway
Processor" on page 164
"Install New Firmware on the Media Modules" on page
165
"Set SNMP Traps" on page 166
"Set up the Controller List for the G700 Media Gateway"
on page 167
"Configure Other G700 Media Gateways (Stack Configu-
ration)" on page 168
"Configure Other G700 Media Gateways (Remote, No
Stack Configuration)" on page 169
"Log in to the S8700 MultiVantage SAT Screens" on page
170
"Assign the S8700's CLAN Node Name and IP Address"
on page 171
NOTE: This assignment should have already been established
as a part of normal S8700 installation.
"Define the IP Network Regions for the G700 Media Gate-
way and the S8700 CLAN Board(s)" on page 172
NOTE: This definition should have already been established as
a part of normal S8700 installation.
or "Change TCP/IP
3 of 4
35