Avaya G700 Installation And Upgrades page 38

1 Getting Started:
Table 5. Task List to Upgrade a G700 Media Gateway (with an S8300 or Local
Survivable Processor) Continued
Task
"Install the New License File, If Nec-
essary" on page 190
NOTE: This step is necessary only
if the customer is adding new fea-
tures to their system.
"Shutdown MultiVantage Software
(Only When the S8300 is an LSP)"
on page 215
"Prepare for the Upgrade (S8300 as
Primary Controller Only)" on page
196
38
Subtasks (If any)
"Change TCP/IP Properties and Network Settings (Win-
dows 2000 and XP)" on page 186
properties (Windows 95, 98, NT 4.0, and Millennium Edi-
tion [ME])" on page 187
"Disable proxies in browser" on page 188
"Connect Laptop to Services Port of S8300" on page 190
NOTE: If you are upgrading an S8300 LSP remotely, you
do not physically connect your laptop to the S8300.
"Log in to the S8300 from Your Laptop using Telnet" on
page 191
"If Necessary, Remove old license and authentication files
from S8300 FTP Directory" on page 192
"Log in to the MultiVantage SAT Screens" on page 192
"Log in to the S8300 Web Interface from Your Laptop" on
page 193
"Load License File (from Your Laptop)" on page 194
NOTE: This step is necessary only if the customer is add-
ing new features to their system.
"If Necessary, Install License and Authentication Files
(from Your Laptop)" on page 195
NOTE: This step is necessary only if the customer is add-
ing new features to their system.
"Run Save Translations (Only If New License or Authenti-
cation Files Installed)" on page 196
"Clear Alarms" on page 196
"Back up the System" on page 196
"Check Link Status" on page 197
"Record All Busyouts" on page 197
"Disable TTI" on page 197
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 - Issue 2 - October 2002
Installation Roadmap and Task Lists
or "Change TCP/IP
2 of 4