Chapter 10: Install a Media Gateway
This chapter contains information about the following topics:
•
Install a Media Gateway Controller
•
Install a DSP daughterboard
Install a Media Gateway Controller
Install the MGC in slot 0 of a Media Gateway cabinet or chassis.
Install a DSP daughterboard
Installing a DSP daughterboard
on an MGC.
Installing a DSP daughterboard
1. Follow electrostatic safety procedures and place the MGC on a safe Electrostatic
2. Place the DSP daughterboard in either daughterboard position 1, or daughterboard
3. Ensure the DSP daughterboard is securely attached to the MGC (using the four
Media Gateway 1000E PRI Gateway Installation and Commissioning
Controller and DSP
daughterboard
on page 55
on page 55
on page 55 describes how to install a DSP daughterboard
Discharge (ESD) surface.
position 2, or both, depending on how the daughterboards are configured from a
TN perspective.
Important:
For the PRI Gateway, the DB-96 and DB-128 daughterboards can be used in
both positions. A software package for this functionality is required- Extended
Media Gateway PRI (MGP) package 418
supplied screws and standoffs).
March 2013
55