Chapter 6: Install S8300 Media Server - Avaya G700 Quick Start Installation Manual

Chapter 6: Install S8300 Media Server

Note:
Complete these steps if you are installing an S8300 Media Server (configured as
Note:
the primary controller or as a Local Survivable Processor).
1. From the front of the G700 Media
Gateway, remove the blank faceplate
from slot V1.
2. For an S8300B, remove the LED
module (located above slot V1) and
place in an anti-static bag.
For an S8300C, you do not need to
remove the LED module.
3. Align the S8300 Media Server with the
lower interior guides.
For an S8300B, insert about 2" into slot
V1.
For an S8300C, insert all the way into
slot V1 until the faceplate is flush with
the LED module.
Issue 8 February 2007 19