Install A New G700 Without An S8300 Using The Gateway Installation Wizard; Checklist - Avaya G700 Installing Manual

Checklist 1: Install New G700 with an S8300 (Primary or LSP) with the Avaya
Installation Wizard (continued)
Major Tasks
If using IA770, administer
Communication Manager for
Integrated Messaging
page 196
Complete the Installation
Process (for an S8300 LSP)
page 197

Checklist 2:

Install a New G700 without an S8300 using the Gateway
Installation Wizard
Use Checklist 2 to install a G700 Media Gateway with the following characteristics:
The G700 does not have an S8300 and is controlled by an external S8300, S8400, S8500,
●
or S8700-series Media Server.
You will use Chapter 2
For help with connecting to and logging in to the G700, see
page 63.
Checklist 2: Install a New G700 without an S8300
Major Task
Before going to the customer
site on page 201
Hardware installation for the
G700 Media Gateway and
S8300 Media Server
page 83
Subtasks
on
- Check planning documentation
on - Connect and administer test endpoints
- Complete electrical installation
- Enable adjunct systems
and Chapter 4 with this checklist.
Subtasks
- Get planning forms
- Get the G700 serial number
- Install the Gateway Installation Wizard
- Set up TFTP server, if necessary
- Download firmware files
- On site checklist
- Unpack and check the order
on - Install the G700
- Cable multiple units
- Attach ground conductors
About the Installation Roadmap and Task Lists
About connection methods
Issue 9.1 June 2006
3 of 3
on
1 of 2
129