Configuring Settings To Use The Software - Sony XVS-9000 User Manual

4
Press [Set].
The selection is reflected in the "Install" field and
"Title" field in the upper list.
5
Press [Install].
"On" appears in the "Install" field to indicate it is cued
for installation. To cancel this installation setting,
press [Install] again, making the field blank.
6
Repeat steps 3 to 5 to confirm all software to be
installed.
7
Press [Execute].
8
Check the message, then press [Yes].
The installation starts.
When completed successfully, "OK" appears in the
"Install" field.
Configuring Settings to Use the
Software
An install key must be entered to enable the software in
order to use the following software options (entry of the
install key is not required if the software is installed at the
factory).
For details about entering the install key, contact your
Sony representative.
To obtain an install key, you may be required to submit the
unique device ID of the device you are using.
You can check the unique device ID in the Engineering
Setup >System >Install/Unit Config >License menu
(7316.6).
• XVS-9000
Software Name
XZS-9200 Multi Program 2 Software
XZS-9510 Switcher Upgrade Software
XZS-9520
XZS-9530
XZS-9540
XZS-9550
a) Required license for XKS-8210 Mix Effect Board (1st to 5th boards) 4K
support
• XVS-8000
Software
XZS-8200
XZS-8510
XZS-8520
XZS-8530
XZS-8540
XZS-8550
b) Required license for XKS-8210 Mix Effect Board (1st to 5th boards) 4K
support
• XVS-7000
Software
XZS-7200
XZS-7510
XZS-7520
XZS-7530
c) Required license for XKS-7210 Mix Effect Board (1st to 3rd boards) 4K
support
• XVS-6000
Software
XZS-6200
XZS-6510
XZS-6520
d) Required license for XKS-7210 Mix Effect Board (1st to 2nd boards) 4K
support
To display the unique device ID
In the Engineering Setup >System >Install/Unit Config
menu (7316), select the target device to operate, and press
[License] to open the License menu (7316.6).
a)
394
Name
Multi Program 2 Software
Switcher Upgrade Software
Name
Multi Program 2 Software
Switcher Upgrade Software
Name
Multi Program 2 Software
Switcher Upgrade Software
b)
c)
d)