Still Image Operations; Creating A Still Image (Freeze); Recalling Still Images - Sony XVS-9000 User Manual

Still Image Operations

Creating a Still Image (Freeze)

Assigning a frame memory source bus signal to an FM
output and then executing a freeze captures a still image
and saves it in memory.
In a freeze, an image can be captured either as a video
frame (a "frame freeze") or a video field ("field freeze").
Notes
• When the system is powered off, files and folders in
memory are lost. Save any required files in storage.
• A field freeze is supported only when the signal format
is 1080i.
• When the available number that can be saved in each
signal format equals the following values, the freeze
operation cannot be executed.
- 1080P, 1080PsF, 1080i, 720P: "0" ("1" in pair mode)
- 3840×2160P, 3840×2160PsF: "3" ("7" in pair mode)
1
Open the Frame Memory >Clip/Still >Record menu
(2113).
2
Select the target FM output for operation in the FM
output selection area.
For details about the method of operation, see
"Selecting an FM Output" (page 172).
3
Press [Through], turning it on.
The input image on the frame memory source bus is
output on the target FM output.
Note
The output on the FM output is delayed by one frame.
4
Select the save destination folder in the folder/file
selection area.
To create a folder
Press [New], and enter the folder name using the
keyboard window.
5
Set the name of the file to create.
Press [Name], and enter the file name using the
keyboard window. The specified file name is
displayed in the status area in the center of the screen.
6
In the <Freeze> group, select one of the following.
Frame: Execute a frame freeze, saving a still image
file in memory.
Field: Execute a field freeze, saving a still image file
in memory.
To enable V/K mode
Press [V/K Mode], turning it on.
For details, see "V/K mode" (page 169).
To save still image files in storage
Select a file stored in memory in the folder/file selection
area. A confirmation message appears.
Select [Yes] to start saving the file in storage.

Recalling Still Images

Selecting a still image file in memory recalls the file on an
FM output.
1
Open the Frame Memory >Clip/Still >Recall menu
(2111).
2
Select the target FM output for operation in the FM
output selection area.
For details about the method of operation, see
"Selecting an FM Output" (page 172).
3
Select the file to recall in the folder/file selection area.
You can also enter the name of a folder/file to search
for (see page 173).
A light-blue frame is applied to the selected file, and
the image is recalled on the target FM output.
174