Offline Editing Of Macro Events - Sony XVS-9000 User Manual

To insert an event
1
On the control panel, disable auto insert mode if it is
enabled.
2
On the control panel, create a macro event.
The created event appears in the macro creation event
list.
For details about the content displayed, see "Macro
File Editing Rules" (page 520).
3
In the macro register creation list, press [<Prev] or
[>Next] to select the position where you want to insert
the created event.
4
Carry out one of the following.
To insert before the event selected in the list: Press
[Insert Before].
To insert after the event selected in the list: Press
[Insert After].
This inserts the created event either before or after the
specified event.
Note
In the following cases, [Insert Before] and [Insert
After] are disabled, and it is not possible to insert the
event.
• When the memory or register is full.
• When the size of the created macro event is larger
than the memory or register space available.
• When multiple events are selected.
• When the number of events exceeds 99.
• When not in macro editing mode.
1) While a macro is being executed on the control panel, when macro
saving has been executed, or when the [EXIT] button in the Flexi Pad
control block has been pressed.
5
Operate the control panel to save the editing result.
To delete an event
1
In the macro register creation list, press [<Prev] or
[>Next] to select the event you want to delete.
To select all events in the register, press [All].
2
Press [Delete].
Note
If not in macro editing mode
it is not possible to delete the selected event.
1) While a macro is being executed on the control panel, when macro
saving has been executed, or when the [EXIT] button in the Flexi Pad
control block has been pressed.
1)
1)
, [Delete] is disabled and
357
3
Operate the control panel to save the editing result.
To modify an event
1
On the control panel, disable auto insert mode if it is
enabled.
2
In the macro register creation list, press [<Prev] or
[>Next] to select the event you want to modify.
3
On the control panel, modify the macro event.
The modified event appears in the macro creation
event list.
For details about the content displayed, see "Macro
File Editing Rules" (page 520).
4
Press [Modify].
Note
If not in macro editing mode
and it is not possible to modify the event.
1) While a macro is being executed on the control panel, when macro
saving has been executed, or when the [EXIT] button in the Flexi Pad
control block has been pressed.
5
Operate the control panel to save the editing result.

Offline Editing of Macro Events

You use the Off Line Edit menu to carry out offline editing
of macro events.
In the Off Line Edit menu, you can carry out editing in the
menu only, unrelated to operation of the control panel.
To display the Off Line Edit menu
In any of the following menus, select the register or device
holding the macro you want to edit, and press [Off Line
Edit].
• Macro >Register >Attach menu (5411)
• Macro >Register >Lock menu (5412)
• Macro >Register >Delete menu (5416)
• Macro >Register >Rename menu (5417)
• File >Shotbox, Macro >Macro >File Edit menu (7142.1)
The Off Line Edit menu (7142.3) appears, and the selected
macro register or macro file is recalled, enabling offline
editing.
Note
If the selected register is locked, [Off Line Edit] is disabled
and it is not possible to display the Off Line Edit menu.
1)
, [Modify] is disabled