Sony XVS-9000 User Manual page 27

a)
Button name Description
XPTHLD DME EXT Sets cross-point hold for the DME
external video bus.
XPTHLD DME UTIL1 Sets cross-point hold for the DME
XPTHLD DME UTIL2 utility 1 and 2 buses.
(XPTHLD DME UTL1,
XPTHLD DME UTL2)
e)
ROW-n XPTHLD Sets cross-point hold for the buses
(XPT HOLD) assigned to the 1st row to 4th row.
n = 1 to 4
e)
ROW-n P/P OUT1 Loads images (OUT1) from the
ROW-n M/E-1 OUT1 to PGM/PST and M/E-1 to M/E-5
e)
ROW-n M/E-5 OUT1 banks into the 1st row to 4th row
(XXX) (re-entry buttons).
n = 1 to 4
XXX = Name set to P/P OUT1, M/
E-1 OUT1 to M/E-5 OUT1
e)
ROW-n P/P OUT6 Loads images (OUT6) from the
ROW-n M/E-1 OUT6 to PGM/PST and M/E-1 to M/E-5
e)
ROW-n M/E-5 OUT6 banks into the 1st row to 4th row
(XXX) (re-entry buttons).
n = 1 to 4
XXX = Name set to P/P OUT6, M/
E-1 OUT6 to M/E-5 OUT6
f)
ROW-n IMAGE Sets the image effect on
(IMAGE) background A bus or B bus on the
1st row to 4th row.
n = 1 to 4
c) g)
UTIL Assigns the specified bus to the 1st
row to 4th row in utility bus mode.
e)
SHIFT ALL Switches the cross-point button
rows on all buses to the shifted
state.
XPTPAD COPY Copies the cross-point pad settings.
b) c)
ROW-n AUX MIX Executes an AUX mix transition
(AUX MIX) when an AUX bus is selected on
the 1st row to 4th row.
n = 1 to 4
b) g)
AUX MIX Executes an AUX mix transition
when the AUX bus is selected.
b) c)
ROW-n KEY Selects the signal on the key side in
(KEY) the 1st row to 4th row.
n = 1 to 4
b) g)
KEY Selects the signal on the key side in
the 2nd row.
XPT INHBT SET Sets/releases inhibit mode for
cross-point buttons.
XPT INHBT ALLCLR Releases inhibit mode for all cross-
point buttons.
g)
DUAL BKGD BUS Toggles dual background bus
mode.
e)
ROW-n PROT Inhibits button operation on the 1st
row to 4th row.
n = 1 to 4
MACRO TAKE Executes a macro take operation.
(TAKE)
Macro Status Displays the macro status.
(EVENT XX/XX) XX/XX = executed event number /
total number of events
a)
Button name
Macro: XXX
(XXX)
a) Button name when setting in the Setup menu. When the display differs
from that on the cross-point pad, the button name shown in parentheses
( ) is displayed.
b) Disabled in key bus mode.
c) Disabled in key/AUX bus delegation mode.
d) 3rd row and 4th row disabled in key bus mode.
e) 1st row disabled in key/AUX bus delegation mode.
f) 1st row and 2nd row disabled in key bus mode and key/AUX bus
delegation mode.
g) Disabled in free assign mode.
Free assign mode
Setting free assign mode in the Setup menu allows you to
use the 1st row to 4th row as cross-point button rows.
For details, see "Setting the Operation Mode of the Cross-
Point Control Block Button Rows" (page 424).
To assign a bus/function to the 1st row to 4th row, use the
delegation buttons on the cross-point pad.
Notes
• When a key bus is assigned and a cross-point button is
pressed, a key fill signal is selected.
While a key bus delegation button is pressed, you can
select a key fill signal on the 1st row and a key source
signal on the 2nd row, regardless of the button row to
which the key bus is assigned.
• When a DME video bus or DME key bus is assigned and
a cross-point button is pressed, a front image signal is
selected. When a cross-point button is pressed while
pressing a DME video bus/DME key bus delegation
button, a rear image signal is selected.
• The operation of the [SHIFT] button is the operation
mode set by the cross-point assign table of the switcher
bank (M/E or P/P), regardless of the buses assigned to
the cross-point button rows.
Key/AUX bus delegation mode
Setting key/AUX bus delegation mode in the Setup menu
allows you to use the 1st row buttons as 2nd row
delegation buttons.
For details, see "Setting the Operation Mode of the Cross-
Point Control Block Button Rows" (page 424).
27
Description
Recalls a macro register (1 to 250).
XXX = macro register name (up to
8 characters)