Functions Supported In Version 3.0; Functions And Operations Not Supported In Version 3.0 - Sony XVS-9000 User Manual

Functions Supported in Version 3.0

The functions newly supported in XVS-9000/8000/7000/
6000 System Ver. 3.0 are as follows.
Functions common to the M/E-1 to M/E-5 menus and
PGM/PST menu are indicated using M/E-1 menu
numbers. For details about the menu numbers of each
switcher bank, see "Menu Tree" (page 487).
Functions relating to the system
Classification Functions
supported
Network SMPTE ST 2110
support
Functions relating to the switcher
Classification Functions
supported
Input XKS-S8112/XKS-
S9112 12G-SDI
Input Board
3840×2160P 2SI
12G format signal
input
Output XKS-S8167/XKS-
S9167 12G-SDI
Output Board
3840×2160P 2SI
12G format signal
output
Format (XVS-9000 only)
converter Output format
converter
XKS-S8112/XKS-
S9112 input format
converter support
M/E dedicated Mode settings used
output for Ext Out (DME or
M/E dedicated
output)
GPI output (XVS-9000 only)
Alarm output from
GPI connector on
switcher
DME XKS-8475 DME
Board
3840×2160P 2SI
format DME support
Classification
DME wipe
Color corrector
Menu See page
No.
Multi viewer
7311.3 page 387
page 434
page 443
Resizer
Functions relating to setup
Menu See page
No.
Classification
– page 63
page 434
Cross-point
7332.6 page 66
7332.7 page 440
Tally
7317.3 page 63
page 398
page 443
7333.19 page 66
7333.21 page 447
page 450
Functions and Operations Not
7333.20 page 444
Supported in Version 3.0
7333.21 page 450
7333.22
The following functions are not supported in Ver. 3.0. The
7332.1 page 434
7332.7 page 439
related button operation and menu settings are disabled.
7332.8
For details about the timing and version for support,
7333.8 page 447
contact your Sony service or sales representative.
DME channels 5 to 8
• DME channel 5 to 8 operation and settings
• DME channel 5 to 8 related bus operation and settings
– page 66
• DME channel 5 to 8 region operation and settings
• 2nd DME related settings
– page 16
page 209
1116 page 120
1126 page 126
41XX page 209
42XX page 511
3
Functions Menu
supported No.
3840×2160P 2SI 1117.3
format DME wipe 1117.4
support 1117.5
1117.7
1127.3
1127.4
1127.5
1127.7
116X
XKS-S8112/XKS- 7332.9
S9112 color
corrector (input
signal) support
(XVS-9000 only) 7333.1
4-system multi 7333.9
viewer support 7333.10
CG border settings 1115.1
in 3840×2160P
format
Functions Menu
supported No.
Cross-point 7322.14 page 409
switching delay
setting (cross-point
delay)
Tally output prior to 7364.3
cross-point
switching
(advanced tally)
See page
page 153
page 511
page 442
page 445
page 452
page 133
See page
page 475