Wipe Modify Clear; Basic Independent Key Transition Wipe Setting Operations; Selecting An Independent Key Transition Wipe Pattern; Setting Independent Key Transition Wipe Modifiers - Sony XVS-9000 User Manual

No. Parameter Adjustment
1 Magnitude Size and direction of the spiral
• A value of –100.00 represents
the maximum movement in the
counterclockwise direction.
• A value of +100.00 represents
the maximum movement in the
clockwise direction.
2 Wave Speed of the lateral waves
Speed • Negative values set the speed
from the left.
• Positive values set the speed
from the right.
Wipe patterns and supported modifiers
Modifiers Type of wipe
Standard Enhanced Rotary Mosaic Random/
Direction Yes Yes
Split Yes Yes
Edge Yes Yes
a) b)
Positioner Yes Yes
Rotation Yes Yes
d)
Aspect Yes Yes
Multi Yes Yes
f)
Pairing Yes Yes
Modulation Yes Yes
(H, V)
g)
Modulation No Yes
(Fringe)
g)
Spring No Yes
h)
Spiral No Yes
a) Pattern numbers 1 to 16, 19, and 20 are not available.
b) Pattern numbers 300 to 303 are not available.
c) Pattern numbers 100 to 103, 150, 151, 516, 518, 604, and 606 are not
available.
d) Pattern numbers 1 to 8, 17, and 18 are not available.
e) Pattern numbers 220 to 223 are not available.
f) Pattern numbers 19 and 20 are not available.
g) Pattern numbers 21, 23, and 24 are available.
h) Pattern numbers 21 and 23 are available.

Wipe Modify Clear

Press [Default Recall] at the lower left of the menu display,
turning it on, then press the VF5 button ([Wipe]) to return
the wipe settings to their initial status.
For details about initial status, see "Power-On (Startup)
State Selection" (page 391).
Yes: Available, No: Not available
diamond
dust
Yes Yes Yes
No Yes Yes
Yes Yes Yes
c)
Yes No No
c)
Yes No No
No No No
e)
Yes Yes No
No No No
Yes No No
No No No
No No No
No No No
Basic Independent Key
Transition Wipe Setting
Operations
You configure independent key transition wipe settings
using the Wipe Adjust menu for each keyer.
For details about independent key transitions, see
"Independent Key Transitions" (page 98).
This section describes operations of key 1 on the M/E-1
bank (M/E-1 >Key1 >Transition/Video Process >Wipe
Adjust menu) as an example.
Selecting an Independent Key
Transition Wipe Pattern
Note
In an independent key transition, you can only use the
standard wipe patterns (pattern numbers 1 to 24).
1
In the M/E-1 >Key1 >Transition/Video Process menu
(1117), press [Wipe Adjust].
The Wipe Adjust menu (1117.1) appears.
2
Press [Pattern Select].
The Pattern Select menu (1117.2) appears.
3
Press the desired pattern to select it.
Setting Independent Key Transition
Wipe Modifiers
You can use the following modifiers in an independent key
transition wipe.
However, the available modifiers may depend on the
pattern you are using.
• Direction
• Soft edge
• Positioner
• Rotation
• Aspect
• Multi
148