Broken Glass Settings; Flying Bar Settings; Blind Settings - Sony XVS-9000 User Manual

No. Parameter Adjustment
2 Random Degree of jaggedness at block
edges

Broken Glass Settings

You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
amount of movement, the width of the partitions, the
degree of randomness in partition width, the center point,
the starting angle, and other parameters.
You can also fix the direction in which shards scatter.
To apply the Broken Glass effect
Open the Non Linear >Broken Glass menu (4141.8).
The items and parameters displayed in the Broken Glass
menu, excluding [Direction], are the same as for the Rings
menu (see page 249).
To fix the direction in which shards scatter
Press [Direction], turning it on.

Flying Bar Settings

You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
direction of movement, the width of the partitions, the
degree of randomness in partition width, the partition
angle, and other parameters.
To apply the Flying Bar effect
1
Open the Non Linear >Flying Bars menu (4141.9).
2
To make transition settings, press [Transition] and set
the following parameters.
No. Parameter Adjustment
1 Transition Degree of transition
2 Random Degree of randomness in distance
moved by each block
3 Angle Direction of movement
3
To set the partition method, press [Partition] and set
the following parameters.
No. Parameter Adjustment
1 Width Width of partition
2 Random Degree of randomness in partition
width
3 Angle Partition angle

Blind Settings

You can set the number of rotations by blocks, the
perspective, the width and position of blocks, the direction,
the center position, and other parameters. There are two
modes: Bar and Wedge.
To apply the Blind effect
1
In the <Mode> group of the Non Linear >Blind menu
(4141.10), select the mode.
Bar: Bar mode
Wedge: Wedge mode
2
To make transition settings, press [Transition] and set
the following parameters.
No. Parameter Adjustment
1 Rotation
2 Perspective Degree of randomness in distance
3
To set the partition method, press [Partition] and set
the following parameters.
When [Bar] is selected in the <Mode> group
No. Parameter Adjustment
1 Width
2 Offset
3 Angle
When [Wedge] is selected in the <Mode> group
No. Parameter Adjustment
4 No
5 Phase
To set the wedge center position
When [Wedge] is selected in the <Mode> group, you can
set the wedge center position.
1
Press [Position].
2
Set the following parameters.
No. Parameter Adjustment
1 H
2 V
250
Number of rotations of the blocks
moved by each block
Width of partition
Degree of randomness in partition
width
Starting angle of effect
Width of blocks
Partition position
Center point in horizontal direction
Center point in vertical direction