Sony XVS-9000 User Manual page 259

Multi format switcher system
Hide thumbs Also See for XVS-9000:
Table of Contents

Advertisement

2
Press [Trail], turning it on.
3
Set the following parameters.
No.
Parameter Adjustment
1
Decay
Amount of afterimage displayed
2
Interval
Freeze interval
3
Live
Proportion of time between frozen
images for inserting live video
a) 0.00 represents no afterimage. 100.00 represents no decay in the
afterimage.
Selecting the priority between the current
image and superimposed trail
In the <Priority> group of the DME >Light/Trail >Trail
menu (4152), select the way in which the images are
overlaid.
Over: Input image is on top.
Under: Afterimage trail is on top.
Selecting the afterimage trail signal
In the <Trail Source> group of the DME >Light/Trail
>Trail menu (4152), select the image to insert in the
afterimage trail.
Notes
• Only [Mix Color] or [Ext Video] can be used between
the Background (see page 269), Flex Shadow (see
page 232), Trail, and Wind (see page 262) effects. If
[Mix Color] or [Ext Video] is selected for one of these
effects, the [Mix Color] or [Ext Video] for the other
effects is disabled, and [Flat Color] is selected in its
place.
• When executing a 4-channel combination, [Mix Color]
and [Ext Video] cannot be selected.
Freeze Video: Freeze the input image to use as the
afterimage.
Flat Color: Uses a single color matte as the afterimage.
You can set the following parameters.
No.
Parameter Adjustment
1
Luminance Luminance
2
Saturation
Saturation
3
Hue
Hue
Hue Rotate: Use a color matte whose hue varies slightly
with each frame for the trail of the afterimages. You
can set the following parameters.
No.
Parameter Adjustment
1
Luminance Luminance
2
Saturation
Saturation
No.
Parameter Adjustment
3
Hue Speed Speed at which the hue changes
Mix Color: Insert a mix color signal (see page 237) in the
afterimage portion.
Ext Video: Insert an external video signal input from Ext
a)
In in the afterimage portion.
Rainbow: Use a freeze image with the hue changing every
frame in the afterimage portion. The difference from
[Hue Rotate] is that many colors appear
simultaneously. You can set the following parameters.
No.
Parameter Adjustment
1
Luminance Luminance
2
Saturation
3
Hue Speed Speed at which the hue changes
Erasing the afterimages that remain in
memory whenever a keyframe is passed
In the DME >Light/Trail >Trail menu (4152), press [Trail
Eraser], turning it on.
When the effect passes a keyframe, the afterimage is
erased before writing a new afterimage.
Selecting the freeze timing
In the <Trail Freeze Timing> group of the DME >Light/
Trail >Trail menu (4152), select the timing for freezing a
trail.
Frame: Freeze in frame units.
Field: Freeze in field units.
Note
When the signal format is 3840×2160P 2SI, 1080P,
1080PsF, or 720P, the freeze timing cannot be specified.
Defocusing the afterimage portion (Defocus)
1
In the DME >Light/Trail >Trail menu (4152), press
[Defocus], turning it on.
2
Set the following parameters.
No.
Parameter Adjustment
1
Defocus V
2
Defocus K
To turn the afterimage portion into stardust
The afterimage portion becomes stardust, and gradually
disappears.
259
Saturation
Degree of defocusing of the video
signal
Degree of defocusing of the key
signal

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents