Sony XVS-9000 User Manual page 246

When [Size] is selected
No. Parameter Adjustment
1 Amp H Amplitude of wave
2 Freq H Frequency of wave
a)
3 Offset H Phase shift direction and offset of
wave in horizontal direction
b)
4 Speed H Direction of travel and speed of
wave
5 Slant Slant of wave
a) Set when [Lock] is enabled.
b) Set when [Lock] is disabled.
Offset
Amp
To stop the wave
Press [Lock], turning it on.
The wave alternately stops and starts each time the button
is pressed.
To select the waveform
1
Press [Form].
2
Set the following parameters.
When [H&V] is selected in the <Mode> group
No. Parameter Adjustment
1 Form H Type of waveform in horizontal
direction
2 Form V Type of waveform in vertical
direction
When [Size] is selected in the <Mode> group
No. Parameter Adjustment
1 Form H Type of waveform
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabolic wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic curve wave
To randomize the modulated waveform
1
Press [Random], turning it on.
a)
a)
a)
246
2
Set the following parameters.
When [H&V] is selected in the <Mode> group
No. Parameter Adjustment
1 Random H Degree of randomness in
horizontal waveform modulation
2 Random V Degree of randomness in vertical
waveform modulation
3 Random All Degree of randomness in both
vertical and horizontal directions
When [Size] is selected in the <Mode> group
No. Parameter Adjustment
1 Random H Degree of randomness in
waveform modulation
To limit the wave range
1
Press [Range], turning it on.
2
Set the following parameters.
When [H&V] is selected in the <Mode> group
No. Parameter Adjustment
1 Size H Level of horizontal wave
modulation
2 Offset H Center point of horizontal
modulation range
3 Size V Level of vertical wave modulation
4 Offset V Center point of vertical modulation
range
When [Size] is selected in the <Mode> group
No. Parameter Adjustment
1 Size H Level of wave modulation
2 Offset H Center point of modulation range
Envelope
To smooth the range envelope when the wave
range is limited
1
Press [Range Envelope], turning it on.
Size
Offset