Resource Sharing Configuration Operations - Sony XVS-9000 User Manual

Item Restrictions
Color backgrounds • Color background 2 not supported
• In SQD, [Multi], [Pairing], and
<Modulation> group settings not
supported
Multi viewers In SQD, screen split by 10, 13, and 16
not supported
a) You can change the M/E banks that are to be disabled in the Engineering
Setup >Switcher >Config >Logical M/E Assign menu (7331.5).
Sub key restrictions
In 3840×2160P format, key 3 and key 4 are called "sub
keys," and the following function and settings restrictions
apply.
Notes
• When the signal format is 3840×2160PsF, sub keys
cannot be used.
• You can set the sub key mode in the Setup menu (see
page 433).
Item Restrictions
Transitions Independent key transitions only
supported
However, the following settings are not
supported.
• Wipe transition type
• DME wipe transition type
Key settings Luminance key and linear key only
supported
However, the following settings are not
supported.
• [Filter] parameter
• [Key Position]
• [Mix Color] in the <Fill Matte> group
• Edge
• Mask
• Blink
Key material On the XVS-8000, primary input, black,
white, and color background signals
only supported
However, XKS-T8110 IP Input
Connector Board input signals not
supported
(No restrictions on the XVS-9000/
7000/6000)
Key priority Priority settings not supported
(Key 4 and key 3 are fixed at the top, in
that order, and key 1 and key 2 priority
can be configured below key 3.)
Resizer Resizer not supported
Key preview/Show Key 3 only supported when the sub key
key is set to [Key3 + Key PVW].
DMEs Functions relating to DMEs not
supported
a) When a dedicated input is used, signals configured using the Engineering
Setup >Switcher >Input >Dedicated Input Assign menu (7332.10) can also
be selected.
a)
512
Resource Sharing
Configuration Operations
Resource sharing is configured using a computer
connected to the same network as the switcher control
station.
Note
You can save and recall resource sharing configuration
data between the switcher system and a computer using the
file manager.
For details, see "File Manager" (page 516).
Preparations
Launch a browser on the computer, and access the menu
(Resource Share Setup) for configuring sharing resources.
For details about computer connection and accessing the
menu, refer to the ICP-X7000 Installation Manual.
1
Access Resource Share Setup.
The Resource Share Setup login screen appears.
2
Enter the administrator user name and password, and
click/tap [Login].
The Resource Share Setup page appears.
Note
For the administrator user name and password, refer to
the ICP-X7000 Installation Manual.