Brick Settings - Sony XVS-9000 User Manual

No. Parameter Adjustment
1 Mix1 Degree of mixing of channels 1 and
a)
2
a) See page 273.
3
Press [Combiner2 Mix], turning it on.
4
Set the following parameter.
No. Parameter Adjustment
1 Mix2 Degree of mixing of channels 3 and
a)
4
a) See page 273.
Automatically setting the priority of
overlapping images
In the Global Effect >Ch1-Ch4 >Combiner Priority menu
(4211), press [Auto] (or [Combiner1 Auto] or [Combiner2
Auto]), turning it on, to set the priority of overlapping
images so that they are automatically determined by their
position on the Z-axis.
Note
It is not possible to cross images. If an image is rotated, the
priority is determined by the position on the Z-axis of the
center of the image.
Crossing images from up to four
consecutive channels in three dimensions
1
In the Global Effect >Ch1-Ch4 >Combiner Priority
menu (4211), press [Depth], turning it on.
2
Set the following parameters.
For "Ch1+Ch2"
No. Parameter Adjustment
1 Soft Softness of edges of crossed
section
For "Ch1+Ch2+Ch3"
No. Parameter Adjustment
1 Soft1 Softness of edges of channel 1 and
channel 2 crossed section
2 Soft2 Softness of edges of channel 2 and
channel 3 crossed section
For "Ch1+Ch2+Ch3+Ch4"
No. Parameter Adjustment
1 Soft1
2 Soft2
3 Soft3
Crossing images from channels 1 and 2,
and channels 3 and 4 in three dimensions
1
In the Global Effect >Ch1-Ch4 >Combiner Priority
menu (4211), press [Combiner1 Depth], turning it on.
2
Set the following parameter.
No. Parameter Adjustment
1 Soft1
3
Press [Combiner2 Depth], turning it on.
4
Set the following parameter.
No. Parameter Adjustment
1 Soft2

Brick Settings

This allows you to create a cuboid by using images of three
consecutive channels.
The Brick effect can combine Ch1, Ch2, and Ch3, or
combine Ch2, Ch3, and Ch4. The images are displayed on
the three surfaces as shown in the following figure.
Combinations of Ch1, Ch2, and Ch3
Upper side: Ch1 image
Side V: Ch2 image
Side H: Ch3 image
Combinations of Ch2, Ch3, and Ch4
Upper side: Ch2 image
Side V: Ch3 image
Side H: Ch4 image
275
Softness of edges of channel 1 and
channel 2 crossed section
Softness of edges of channel 2 and
channel 3 crossed section
Softness of edges of channel 3 and
channel 4 crossed section
Softness of edges of channel 1 and
channel 2 crossed section
Softness of edges of channel 3 and
channel 4 crossed section