Region Selection; Selecting A Device For Operation; Saving Files - Sony XVS-9000 User Manual

Device selection area
Selecting a particular file displays detailed
information about that file in the detail display area at
the top right of the list.

Region Selection

You can carry out a file operation on a number of regions
simultaneously. However, a region selection is not
required for the following files.
• Key memory
• Video process memory
• Shotbox
• Macro
• Macro attachment
To select a region
1
In the File menu, press the region selection area at the
top right of the screen.
The region selection window appears.
2
Select the target region for operation.
For regions you do not want to select, press the
corresponding button, turning it off.
3
Press [OK].

Selecting a Device for Operation

To carry out file operations, you need to specify the
register, local drive, removable drive, or other storage
device as the location of the data or file. You can also
specify a directory.
Region selection area
Detail display area
374
If NFS (Network File System) is enabled in the Setup
menu, [Network] is added to the device for operations.
For details about NFS, see "Configuring the NFS Server"
(page 385).
To select a device
1
In the File menu, press the button on the left in the
device selection area above the list.
A pull-down menu appears.
2
Select the target device for operation.
Register: Register
Local Drive: Local drive
Removable Drive: Removable drive
Network: Files on a network (NFS)
The selected device name is displayed on the button on
the left in the device selection area.
3
Press the button on the right in the device selection
area.
The directory selection window appears.
Up to 40 directories are displayed per page, and you
can move between pages using the b and B buttons.
The maximum number of directories that can be
created is 120 for a removable drive and 200 for the
local drive or NFS.
4
Press the button for the target directory to use.
The selected directory name is displayed on the button
on the right in the device selection area.
Notes
• The devices that can be selected in the device
selection area vary depending on the function and
the menu.
• When [Register] is selected in the device selection
area, a directory cannot be specified.

Saving Files

This section describes saving snapshot register data to the
local drive or a removable drive as an example.
1
Open the File >Snapshot >Snapshot menu (7131).
2
In the device selection area in the list on the left, select
[Register].
3
In the device selection area in the list on the right,
select [Local Drive] or [Removable Drive], then
specify a directory.