Circle Settings; Panorama Settings; Page Turn Settings - Sony XVS-9000 User Manual

When [Circle], [Rectangle], [Star], or [Heart] is
selected
No. Parameter Adjustment
1 Magnify H Magnification ratio
2 Curve H Curvature
3 Size H Size
4 Angle Slant angle
5 Aspect Aspect ratio
When [Bar] is selected
No. Parameter Adjustment
1 Magnify H Magnification ratio
2 Curve H Curvature
3 Size H Size
4 Angle Slant angle
When [Cross] is selected
Parameter group [1/2]
No. Parameter Adjustment
1 Magnify H Horizontal magnification ratio
2 Curve H Horizontal curvature
3 Size H Horizontal size
Parameter group [2/2]
No. Parameter Adjustment
1 Magnify V Vertical magnification ratio
2 Curve V Vertical curvature
3 Size V Vertical size
To make only the lens part visible
Press [Lens Only], turning it on.
The parts of the image outside the lens are removed.
To set the lens center position
1
Press [Position].
2
Set the following parameters.
No. Parameter Adjustment
1 H Lens center position in horizontal
direction
2 V Lens center position in vertical
direction

Circle Settings

You can set the size of the circle. You can also make the
axis of modulation vertical.
Applying the Circle effect
In the Non Linear >Circle menu (4141.17), set the
following parameter.
No. Parameter Adjustment
1 Radius
To make the axis of modulation vertical
Press [Mod V], turning it on.
The axis of modulation when modulating to a circle
becomes vertical.

Panorama Settings

You can set the horizontal and vertical curvature, and the
curve center position.
Applying the Panorama effect
In the Non Linear >Panorama menu (4141.18), set the
following parameters.
No. Parameter Adjustment
1 Curve H
2 Curve V
3 Position H
4 Position V

Page Turn Settings

There are four modes: H&V, H, V, and Off. You can select
the turn position, the radius of the turned portion, the
amount and angle of turning, and the input video for the
front and back pages.
Applying the Page Turn effect
1
In the <Split Mode> group of the Non Linear >Page
Turn menu (4141.19), select the partition method.
H&V: The image turns as it is split from the center
into 4 parts: left, right, upper, lower.
H: The image turns as it is split from the center into 2
parts: left, right.
V: The image turns as it is split from the center into 2
parts: upper, lower.
When nothing is selected (Off): There are no splits
and the image turns from the edge.
2
Set the following parameters.
No. Parameter Adjustment
1 Radius
253
Size of circle
Horizontal curvature
Vertical curvature
Horizontal curve center position
Vertical curve center position
Radius of turn part