Sony XVS-9000 User Manual page 40

Button name Description
M/E1 to M/E5, P/P • Switches to resizer operation
mode.
• You can select more than one
button. The first selected button
becomes the reference, and is lit
green. Subsequent selected
buttons are lit amber.
DME Switches to three-dimensional
transform operation mode.
MENU • Switches to menu parameter
operation mode.
• You can adjust parameters
(numbers 1 to 3) of the currently
displayed menu using the
trackball and Z-ring.
• Press the [MENU] button twice,
turning it on green, to fix the
target of the trackball and Z-ring
to the parameter currently being
adjusted.
RUN CTRL (run • Switches to keyframe operation
control)
mode.
• Enables operation on the timeline
of the currently recalled keyframe
effect using the Z-ring.
DEV (device) Switches to VTR/disk recorder/
frame memory operation mode.
b Channel selection buttons
These select the target to control when in resizer operation
mode, three-dimensional transform operation mode, VTR/
disk recorder/frame memory operation mode, and so on.
You can select more than one channel. The first selected
button becomes the reference channel, and is lit green.
Subsequent selected buttons are lit amber.
For buttons that not set by default, assignment is required
in the Setup menu.
For details, see "Setting Device Control Block (Trackball)
Button Assignments" (page 404).
Button name Description
K1RSZ to K8RSZ Selects the target resizer in resizer
operation mode.
CH1 to CH4 • Selects the target DME channel
in three-dimensional transform
operation mode.
• Select the target DME channel
for operation in the DME menu.
• Displays the state of the
reference channel in the DME
menu.
CH1 to CH12 Selects the target device in VTR/
disk recorder/frame memory
operation mode.
Button name
FM1 CLIP to FM20
CLIP
c Operation buttons
The function of the buttons vary depending on the
operation mode.
Resizer operation mode
This mode performs two-dimensional transform
operations on images using a resizer.
Button name
RSZR ON (resizer on)
ASP PERS (ASP:
aspect)
LOC SIZE (location
and size)
ROT (ROT PERS:
rotation and
perspective)
BDR/CROP (border/
crop)
SHIFT
CLR WORK BUFR
(clear work buffer)
FINE
40
Description
(Assignment in the Setup menu is
required.)
Selects the target frame memory
clip in VTR/disk recorder/frame
memory operation mode.
Description
Enables/disables the selected
resizer.
Adjusts the aspect ratio of a key to
which the resizer is applied using
the trackball or Z-ring.
Moves/zooms a key to which the
resizer is applied using the trackball
or Z-ring.
Adjusts the rotation and
perspective of a key to which the
resizer is applied using the trackball
or Z-ring.
(Assignment in the Setup menu is
required.)
• When the [BDR/CROP] button is
pressed (lit amber):
Adjusts the border width of a key
to which the resizer is applied
using the trackball or Z-ring.
• When the [BDR/CROP] button is
pressed while pressing the
[SHIFT] button (lit green):
Adjusts the crop width of a key to
which the resizer is applied using
the Z-ring.
Used in combination with the
[CTR], [CTR WORK BUFR], and
[BDR/CROP] buttons.
• When the [CLR WORK BUFR]
button is pressed once:
Returns the resizer two-
dimensional transform and
rotation parameters to the
defaults.
• When the [CLR WORK BUFR]
button is pressed twice, or is
pressed once while pressing the
[SHIFT] button:
Returns all resizer parameters to
the initial state.
Switches to fine mode, enabling
fine adjustment control of setting
values using the trackball and Z-
ring.