Shadow Settings - Sony XVS-9000 User Manual

You can adjust the height of the brick, the overlap between
the three images, and the way to insert the side images.
Creating a Brick
1
Open the Global Effect >Ch1-Ch4 >Brick menu
(4212).
2
Press [Brick], turning it on.
The Brick effect is enabled, and a cuboid (brick)
showing the images of three channels appears.
Adjust parameters for the height of the brick and the
overlap between the three images.
Notes
• When Brick is enabled, the Z-axis position of the
Front image in source space is shifted by 1/2 the
height, magnifying the image slightly.
• The flex shadow function cannot be enabled when
Brick is enabled.
3
Set the following parameters.
No. Parameter Adjustment
1 Height Height of brick
2 Front Front overlap
Overlap
3 Side H Side H overlap
Overlap
4 Side V Side V overlap
Overlap
4
Select how to insert the image for the side view with
changed value for Height in <Side V> for Side V and
in <Side H> for Side H.
Crop: Crop the parts that do not fit into the side
without shrinking the picture. You can set the
following parameters.
No. Parameter Adjustment
1 H Position of left crop
2 V Position of top crop
3 Rotation Angle of rotation, when rotated
around the Z-axis of source space
The set position becomes the upper left corner of Side
V or Side H. The right and bottom sides of the inserted
image are set automatically.
Compress: Images are inserted after being reduced.
You can set the following parameters.
No. Parameter Adjustment
1 Top Position of top crop
2 Left Position of left crop
No. Parameter Adjustment
3 Right
4 Bottom
5 Rotation
The parts of the image defined by Top, Left, Right, and
Bottom are magnified or shrunk to fit into Side V or
Side H.
To invert the image in a side view
For example, to invert the image on the front of Side H,
press the following buttons in the <Side H Front> group,
turning them on.
Invert H: Invert horizontally.
Invert V: Invert vertically.
For the images on the other sides, use a similar operation
in the following groups:
• Back image of Side H: <Side H Back> group
• Front image of Side V: <Side V Front> group
• Back image of Side V: <Side V Back> group
Actual size,
upper left
corner
Crop

Shadow Settings

This effect uses two successive channels.
You can adjust the position and density of the shadow with
respect to the image, and the color of the shadow.
The channel with the largest number (for example, Ch2 in
the case of Ch1 and Ch2) becomes the shadow.
Note
When the combiner function is disabled, the shadow
function cannot be used.
Applying a Drop Shadow
Depending on the combiner channel selection, the buttons
that can be used varies as follows.
276
Position of right crop
Position of bottom crop
Angle of rotation, when rotated
around the Z-axis in source space
Magnified or
Top side
shrunk to fit
Side H
Side V
Set automatically
Compress
Cropped region