Sony XVS-9000 User Manual page 426

About re-entry button assignment
The following re-entry buttons can be assigned to buttons
on the cross-point pad.
• ROW-n P/P OUT1, ROW-n M/E-1 OUT1 to ROW-n M/
E-5 OUT1 (n = 1 to 4)
• ROW-n P/P OUT6, ROW-n M/E-1 OUT6 to ROW-n M/
E-5 OUT6 (n = 1 to 4)
The button numbers and video/key pair numbers of re-
entry buttons is fixed to the following.
Button name Button V/K pair
(n = 1 to 4) number number
ROW-n P/P 284 211
OUT1
ROW-n 281 221
M/E-1 OUT1
ROW-n 282 231
M/E-2 OUT1
ROW-n 283 241
M/E-3 OUT1
ROW-n 285 251
M/E-4 OUT1
ROW-n 286 261
M/E-5 OUT1
ROW-n P/P 294 216
OUT6
ROW-n 291 226
M/E-1 OUT6
ROW-n 292 236
M/E-2 OUT6
ROW-n 293 246
M/E-3 OUT6
ROW-n 295 256
M/E-4 OUT6
ROW-n 296 266
M/E-5 OUT6
The re-entry video/key numbers are set as the pair numbers
by default. Use the defaults as-is, since changing the
settings will make it impossible to select the correct
signals.
Setting the HOME page of the cross-point
pad
This sets the page that is displayed when the [HOME]
button on the cross-point pad is pressed.
1
In the <Bank Select> group of the Engineering Setup
>Panel >Operation >Xpt Module Operation menu
(7326.12), select the target bank to set.
2
In the <Xpt Pad> group, press [Home Page Set].
V default K default
setting setting
P/P OUT1 P/P OUT1
M/E-1 M/E-1
OUT1 OUT1
M/E-2 M/E-2
OUT1 OUT1
M/E-3 M/E-3
OUT1 OUT1
M/E-4 M/E-4
OUT1 OUT1
M/E-5 M/E-5
OUT1 OUT1
P/P OUT6 P/P OUT6
M/E-1 M/E-1
OUT6 OUT6
M/E-2 M/E-2
OUT6 OUT6
M/E-3 M/E-3
OUT6 OUT6
M/E-4 M/E-4
OUT6 OUT6
M/E-5 M/E-5
OUT6 OUT6
426
3
Enter the page number to set (1 to 14) using the
numeric keypad window, then press [Enter].
Setting the page recall function on the
cross-point pad
You can set to display a specific page when a button on the
cross-point pad is pressed.
A frame is shown in the button name display for buttons
with a page recall function.
1
In the Engineering Setup >Panel >Operation >Xpt
Module Operation menu (7326.12), press [Jump Page
Assign] in the <Xpt Pad> group.
The Jump Page Assign menu (7326.17) appears.
The left side of the status area shows the cross-point
pad buttons. The upper right side shows the currently
selected page number and name, and the lower right
side shows a list of pages.
2
In the <Bank Select> group, select the target bank to
set.
3
Select the target page to set.
No. Parameter Adjustment
1 Page Page selection
4
Press the target button display to set.
5
In the list on the right, select the page to display.
6
Press [Set].
The page selected in the list on the right is set, and the
page number and name are displayed in orange.
To check the page recall function settings
Press [Button Assign] or [Jump Page Assign] to change the
button display.
Pressing [Button Assign] displays the names of functions
assigned to the buttons. Buttons set with a page recall
function display the function name in orange. Pressing
[Jump Page Assign] displays the specified page number
and page name.
To release the setting
Select the target button to release, then press [Clear].
To return button assignments to the defaults
Press [Default Recall], check the message, then press
[Yes].
The button assignments on all pages (1 to 14), including
the Xpt Pad Btn Assign menu (7326.14) settings, are
returned to the defaults.