Locking File Loading Operations - Sony XVS-9000 User Manual

3
Select the menu candidates for locking.
To select all menus within a group, press [ALL].
You can also select a menu while it is open.
For details, see "Selecting an opened setup menu to
lock" (page 397).
4
Press [Lock Item Select].
The selected menus become candidates for locking,
and a " " padlock icon (unlocked) appears in the
"Lock" field.
Note
If a menu is already locked, selection of lock
candidates is not possible. Unlock the menu and then
select a lock candidate.
To deselect a lock candidate
Select a lock candidate menu, and press [Lock Item
Select].
5
Repeat steps 2 to 4 to select all lock candidates.
To deselect all lock candidates
Press [Lock Item All Clear], check the message, then
press [Yes].
6
Press [Lock].
7
Enter a password of up to 16 characters in the
keyboard window, and press [Enter].
The menus in the list of candidates are all locked. The
padlock icon changes to "
To release the lock
When locked, press [Lock] and enter the password.
Changing the lock password
1
In the Engineering Setup >System >Maintenance
>Setup Operation Lock menu (7317.1), press [Change
Password].
2
Check the message, then press [Yes].
3
Follow the on-screen instructions to enter the old
password and new password.
Selecting an opened setup menu to lock
With the menu you want to lock in the open state, press
[Lock Item Select] at the lower left.
" (locked state).
397
Lock Item Select button
[Lock Item Select] turns red, and a padlock icon appears.
The lock candidate menu selection is reflected in the
Engineering Setup >System >Maintenance >Setup
Operation Lock menu (7317.1).
Note
If a menu is already locked, selection of lock candidates is
not possible. In this case, [Lock Item Select] is displayed
as follows.
When the displayed menu is
locked
In the Setup Operation Lock menu (7317.1), unlock the
menu and then select a lock candidate.

Locking File Loading Operations

You can inhibit load operations for a specified file
category.
1
In the Engineering Setup >System >Maintenance
menu (7317), press [File Load Lock].
The File Load Lock menu (7317.2) appears.
2
Select the category as the candidate for locking.
To select all categories, press [ALL].
3
Press [Lock].
When a menu other than the
displayed menu is locked