Sony XVS-9000 User Manual page 208

All folders and files are displayed as the target for
operations in the menu for each logical switcher.
Notes
• When the signal formats of logical switchers 1 and 2 are
different and Dual Simul mode is enabled, shared mode
cannot be used.
• When an FM output is locked on either logical switcher,
file operations on the file loaded in the locked FM output
are not available from the other logical switcher.
• The following operations are available on either logical
switcher for a file loaded in an FM output on the other
logical switcher.
Copy, move, delete, rename, Couple function, Separate
function, trim, and unload (remove from memory)
Dedicated mode
When a switcher is started with resource sharing enabled,
dedicated folders with the following names are created for
each logical switcher.
• Logical switcher 1: !L_SWR1
• Logical switcher 2: !L_SWR2
Only folders and files in the dedicated folder are displayed
as the target for operations in the menu for each logical
switcher.
Notes
• In dedicated mode, up to 2-level hierarchy folders are
supported using frame memory.
• When resource sharing is enabled, the dedicated folder
of the logical switcher is not displayed in the menu. Only
folders and files in the dedicated folder are displayed.
When resource sharing is disabled, the dedicated folder
is also displayed in the menu, and folder and file
operations are supported.
• If the same file structure is used in the dedicated folders
for logical switchers 1 and 2, frame memory operations
on both logical switchers are linked when Dual Simul
mode is set.
Frame memory outputs
Frame memory outputs (FM1 to FM20) are assigned to
logical switchers 1 and 2 in groups of four channels.
Sharing is supported when the signal formats of logical
switchers 1 and 2 are the same.
Shared frame memory output restrictions
Shared FM outputs have the following restrictions.
• On logical switcher 2, only the selection of cross-points
of FM outputs is available. Other FM output operations
are not available.
• Logical switcher 1 information is linked to and displayed
on the FM output button in the Frame Memory menu of
logical switcher 2 (excludes audio data and lock setting).
• During clip creation (recording), the FM output button in
the Frame Memory menu is displayed as follows.
Logical switcher 1: Thumbnail is black, and
"Recording" is displayed.
Logical switcher 2: Thumbnail is black, and "Through"
is displayed.
• When a frame memory folder is set to dedicated mode
and a shared FM output is selected, the thumbnail for
files are not displayed in the Frame Memory menu of
logical switcher 2.
208