Sony XVS-9000 User Manual page 349

Deleting a particular range of events
1
Specify an edit point (see page 348).
2
Press the [FROM TO] button in the utility/shotbox
control block.
The display in the numeric keypad control block
shows the current event number and the indication
"TO."
3
Using the numeric keypad in the numeric keypad
control block, carry out the following operations.
• To set the first event in the range to be deleted, press
the [CLR] button, then enter the event number using
the numeric keypad buttons, and press the [ENTER]
button to confirm.
• To set the last event in the range to be deleted, enter
the event number using the numeric keypad, and
press the [ENTER] button to confirm.
4
Press the [DEL] button in the utility/shotbox control
block.
Deleting all events
1
Specify an edit point (see page 348).
2
Press the [ALL] button in the utility/shotbox control
block, turning it on orange.
3
Press the [DEL] button in the utility/shotbox control
block.
Moving events
1
Specify the edit point for the start of the range to be
moved (see page 348).
2
To move a number of events in a single operation,
press the [FROM TO] button in the utility/shotbox
control block and specify the event range.
For details about specifying a range, see "Deleting a
particular range of events" (page 349).
3
Press the [DEL] button in the utility/shotbox control
block.
This deletes the specified events and stores them in the
paste buffer.
4
Move the edit point to the position to which you want
to move the events.
5
Carry out the following operations using the buttons in
the utility/shotbox control block.
• To insert the move target events after the edit point,
press the [PASTE] button.
• To insert the move target events before the edit
point, press and hold the [SHIFT] button and press
the [PASTE] button.
Copying events
1
Specify the edit point for the start of the range to be
copied (see page 348).
2
To copy a number of events in a single operation, press
the [FROM TO] button or the [ALL] button in the
utility/shotbox control block.
If you press the [FROM TO] button, specify the event
range.
For details about specifying a range, see "Deleting a
particular range of events" (page 349).
3
Press the [COPY] button in the utility/shotbox control
block.
This copies the specified events and stores it in the
paste buffer.
4
Move to the edit point to the destination you want to
copy the events.
5
Carry out the following operations using the buttons in
the utility/shotbox control block.
• To insert the copy target events after the edit point,
press the [PASTE] button.
• To insert the copy target events before the edit point,
press and hold the [SHIFT] button and press the
[PASTE] button.
Inserting a pause event
1
Specify an edit point (see page 348).
2
If required, set auto insert mode using the [AUTO
INS] button of the utility/shotbox control block.
3
Press the [PAUSE] button in the utility/shotbox
control block, turning it on blue.
The indication "PAUSE" appears in the numeric
keypad control block display.
4
Enter the pause duration using the numeric keypad of
the numeric keypad control block (0, or 1 to 999
frames), and press the [ENTER] button.
349