Sony XVS-9000 User Manual page 368

• To insert an event after the selected event, carry
out the new menu operation, then press [Insert
After].
To insert a pause event
Set the pause time, and press [Pause Set] (see
page 367)
.
To delete the selected event
Press [Delete].
To delete all events, press [All Event Select], turning
it on, and press [Delete].
5
Set the event execution interval.
No. Parameter Adjustment
5 Interval Event interval (seconds)
Time (Sec)
The settings are applied to each menu macro register.
6
Press [Store].
To exit editing mode without saving a menu macro
Press [Exit].
7
Enter a menu macro register number as required in the
numeric keypad window, and press [Enter].
The edited menu macro is saved in the specified
register.
About the menu macro editing mode
display
If you switch to another menu while in menu macro editing
mode, the menu screen display is as shown below.
Screen when the keyframe status is displayed
The keyframe status section appears as follows.
• Menu macro register number
• Menu macro register name
• Current event number /
total number of events
• Remaining memory
The Previous page button position shows one of the following.
• When [Auto Insert] is enabled, "Menu Macro Auto Insert"
appears.
• When [Auto Insert] is disabled, "Menu Macro Insert After"
appears, and operates as [Insert After].
Screen when the keyframe status is not displayed
The Default Recall button position shows the following.
Menu shortcut button to Menu Macro Edit menu
The Previous page button position shows one of the following.
• When [Auto Insert] is enabled, "Menu Macro Auto Insert"
appears.
• When [Auto Insert] is disabled, "Menu Macro Insert After"
appears, and operates as [Insert After].
368
Menu shortcut button to
Menu Macro Edit menu