Setting The Vertical Blanking Interval And Through Mode; Setting The Safe Title Area; Cropping A 4:3 Mode Image In Hd Format - Sony XVS-9000 User Manual

Setting the Vertical Blanking Interval
and Through Mode
Note
Through mode cannot be set for outputs whose signal
format is converted by an output format converter.
1
In the Engineering Setup >Switcher >Output menu
(7333), press [V Blank/Through].
The V Blank/Through menu (7333.3) appears.
2
Select the target output to set.
3
Press [V Blank Mask], and set the following
parameter.
No. Parameter Adjustment
2 Mask End Final value for vertical blanking
interval
a) The adjustment range varies as follows, depending on the signal
format.
3840×2160P (also includes output when active area is set to
4096×2160), 1080P: 15 to 41
3840×2160PsF, 1080PsF, 1080i: 7 to 20
720P: 7 to 25
To return the parameters to their default settings
Press [Default].
4
To enable through mode, press [Through Mode],
turning it on.
Through mode can be enabled for the following
outputs.
• AUX1 to 48, Edit preview output
• Program outputs of each M/E and PGM/PST bank
• Clean outputs of each M/E and PGM/PST bank

Setting the Safe Title Area

Note
Safe titles cannot be used on outputs where the active area
is set to [4096×2160].
1
In the Engineering Setup >Switcher >Output menu
(7333), press [Safe Title].
The Safe Title menu (7333.4) appears.
2
Select the target output to set.
3
Press [Safe Title], turning it on, to enable the safe title
setting in the Misc >Safe Title menu (3221),
a)
446
4
Perform the following operations.
To display a box: Press [Box1] or [Box2], turning it
on.
To display a cross: Press [Cross], turning it on.
To display a grid: Press [Grid], turning it on.
5
Perform the following operations, according to the
selection in step 4.
When [Box1] or [Box2] is selected: Set the following
parameters.
No. Parameter Adjustment
2 Box Size Box size
3 Luminance Display color brightness
a) Adjustable for [Box2].
When [Grid] is selected: In the <Grid Size> group,
set the grid size relative to the picture frame
(80.00%, 85.00%, 90.00%, 100.00%).
6
Perform the following operations, according to the
selection in step 4.
When [Box1] or [Box2] is selected: In the <Box1
Adjust> or <Box2 Adjust> group, select the screen
aspect ratio (16:9, 14:9, 4:3).
When [Grid] is selected: In the <Grid Adjust> group,
select the screen aspect ratio (16:9, 4:3).
Cropping a 4:3 Mode Image in HD
Format
In HD format, this allows you to crop an image having a
screen aspect ratio of 16:9 to an aspect ratio of 4:3 for
output (4:3 crop).
Note
When a screen aspect ratio of 16:9 is set in the Engineering
Setup >System >Format menu (7313), 4:3 cropping is
disabled.
1
In the Engineering Setup >Switcher >Output menu
(7333), press [4:3 Crop].
The 4:3 Crop menu (7333.5) appears.
2
Select the target output to set.
3
Press [4:3 Crop], turning it on.
a)