Making Settings Required To Use The Software - Sony MVS-8000X System User Manual

8
Press [Execute].
A confirmation message appears.
9
Press [Yes].
This carries out the installation, and when it completes normally, the
"Install" box shows "OK."

Making Settings Required to Use the Software

To use the software listed below, you are required to enter an install key which
validates the software. (If the software has been factory installed, the install key
is not required.)
For the method of obtaining an install key, contact your Sony representative.
To obtain a key, you may be required to submit the unique device ID of the
switcher you are using. You can check the unique device ID in the Install/Unit
Config menu of the switcher, using the following procedure.
BZDM-9050
BZS-8050
BZS-8200X
BZS-8420X
BZS-8560X
BZDM-8560
a) This can be used only on the MVE-8000A.
To display the unique device ID
1
In the System >Install/Unit Config menu, use either of the following
methods to select the device for which you want to register the license.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
2
Press [License].
The License menu appears as follows.
Texture Lighting Software (for MVE-9000)
Editing Control Software
Multi Program 2 Software
Color Corrector Software
Switcher Upgrade Software
a)
DME Upgrade Software
Installation and Device Setup (Install/Unit Config Menu)
921