Symbols And Parameters - Sony XVS-9000 User Manual

Event
Frame memory clip audio data enable/disable
Record device
AUX mix transition enable/disable
Page recall on cross-point pad
Delegation selection in cross-point button rows
Trigger test output from GPI port
a) For details about pause events, see "Macro Execution" (page 345).

Symbols and Parameters

Symbol Parameter name
MEXpt ME?
MEBus?
Xpt?
VideoKey?
AuxXpt AuxBus?
Xpt?
VideoKey?
MEAutoTransition ME?
Time?
ABusXpt?
BBusXpt?
MECut ME?
KeyAutoTransition ME?
Key?
Time?
Direction?
Arguments
ME1 to ME5, PP
A, B, Key1 to Key8,
Key1Source to Key8Source,
Utility1, Utility2,
DMEExternalVideo
1 to 300
Video, Key
EditPreview,
Aux1 to Aux48,
FrameMemory1,
FrameMemory2,
DME1Video to DME4Video,
DME1Key to DME4Key,
DME1Video2nd to
DME4Video2nd (a),
DME1Key2nd to
DME4Key2nd (b),
DMEUtility1, DMEUtility2
1 to 300
Video, Key
ME1 to ME5, PP
Current (a),
0 to 999
Current (a),
1 to 300
Current (a),
1 to 300
ME1 to ME5, PP
ME1 to ME5, PP
Key1 to Key8
Current (a),
0 to 999
ToOn (a),
ToOff (b),
Any (c)
523
Symbol
Audio
DeviceRecord
AuxMix
XptPadPage
XptRowAssign
GPITestFire
Description
Target control block
Target bus
Cross-point button number in the main table set
in the Xpt Assign menu
Type of signal (video signal or key signal) to
select on the target bus
Target bus
(a): DMEnVideo2nd= Bus for selecting
background video signal of DMEn channel (n=1
to 4),
(b): DMEnKey2nd= Bus for selecting
background key signal of DMEn channel (n=1 to
4)
Cross-point button number in the main table set
in the Xpt Assign menu
Type of signal (video signal or key signal) to
select on the target bus
Target control block
Transition rate (number of frames)
(a): Mode in which the value set on the current
transition control block is used
A bus or B bus cross-point button number
Use the button number of the main table set in
the Xpt Assign menu.
(a): Mode in which the cross-point number set
for the current A bus or B bus is used
Target control block
Target control block
Key of the target independent key transition
Transition rate (number of frames)
(a): Mode in which the current value set for an
independent key transition is used
Transition execution mode
(a): Key is inserted
(b): Key is removed
(c): Transition is always executed
Using Continue
No
Yes
No
No
No
No