Key Modifiers - Sony XVS-9000 User Manual

Key Modifiers

Edge modifiers
You can apply borders and other modifiers to the edge of
the key image.
Type Description
Normal This is the state with
no key edge modifiers
applied.
Border Applies a border
around the key. You
can adjust the border
width and density. You
can also enable the
separate edge
function, and adjust
the top, bottom, left,
and right border
widths separately.
Drop Applies a border
border below and to the right
of the key, for
example. You can
adjust the border
width, position, and
density.
Shadow Applies a shadow
below and to the right
of the key, for
example. You can
adjust the shadow
width, position, and
density.
Outline Uses the outline as
the key. You can adjust
the outline width and
density. You can also
enable the separate
edge function, and
adjust the top, bottom,
left, and right outline
widths separately.
Emboss Applies an embossing
effect around the
periphery of the key.
You can adjust the
emboss width,
position, and density.
You can adjust the
density separately for
key fill and key edge.
When embossing is
enabled, the Fine Key
and zabton functions
are disabled.
Video
–
107
Type Description
Soft Softens the edge of
edge the key.
Zabton Inserts a translucent
pattern to the key
background. You can
adjust the pattern size,
softness, density, and
color.
Edge type and key fill/key source position
The key edge modification function has two modes: a
mode (key drop on mode) in which the key fill/key source
position moves downward, and a mode (key drop off
mode) in which it does not move.
Key drop on mode: The key fill/key source position
moves downward by eight scan lines or four scan lines.
When a drop border or shadow is selected, it is
possible to apply a border to the top edge of the key.
Key drop off mode: The key fill/key source position does
not move. When a drop border or shadow is selected,
it is not possible to apply a border to the top edge of the
key.
In key drop on mode, a menu setting selects between the
mode (4H mode) in which the key fill/key source position
is lowered by four scan lines, and the mode (8H mode) in
which the key fill/key source position is lowered by eight
scan lines.
When Fine Key is enabled, the edge width is forced into
the range 0.00 to 4.00.
In the following situations, the key drop on mode is
forcibly enabled.
• When the edge type is border, outline, or emboss
• When fine key is enabled
To fix key fill/key source to key drop off mode
Enable frame delay mode.
Regardless of the fine key and edge type settings, key fill
and key source are fixed to key drop off mode.
Notes
• The resizer function is used in frame delay mode. The
frame delay mode setting is enabled only when the
conditions for use of the resizer are satisfied.
• When using dual resizer effects, the frame delay mode
setting is disabled on the two target keys.
• When the frame delay mode setting is enabled, the video
has a one-frame delay.
Edge fill
When a border, drop border, or shadow is selected, you can
select a signal to fill the edges, called an edge fill.
Video
–
–