Sony XVS-9000 User Manual page 514

The status of the current resource assignments are
displayed in [Resource Configuration] (total number
of resources, number assigned to logical switcher 1,
number assigned to logical switcher 2).
Click/tap [Select] in [Logical Switcher Setting] for a
resource to display the resource configuration pop-up
window. To assign the resource to logical switcher 1,
select [1]. To assign the resource to logical switcher 2,
select [2]. When finished, click/tap [Done] to close the
pop-up window.
Notes
• The following resources can be configured for
sharing on logical switchers 1 and 2.
- Inputs
- Frame memory outputs (only when the signal
formats of logical switchers 1 and 2 are the same)
- Color backgrounds (only when the signal formats
of logical switchers 1 and 2 are the same)
- Internal format converters (only when the signal
formats of logical switchers 1 and 2 are the same)
• If a logical switcher is set to 4K format, the number
of the following resources that are available for 4K
format use is shown in parentheses.
- Inputs
- Outputs
- Frame memory outputs
- Color backgrounds
- Internal format converters
Input settings
Click/tap [Select] for [Input (ch)] to display the pop-up
window.
Select [1] or [2] for each group. Select both [1] and [2]
to share on logical switchers 1 and 2.
Output settings
Click/tap [Select] for [Output (ch)] to display the pop-
up window.
Select [1] or [2] for each group.
Switcher bank (M/E) settings
Click/tap [Select] for [Mix (board)] to display the pop-
up window.
Select [1] or [2] for each board.
DME settings
Click/tap [Select] for [DME (ch)] to display the pop-
up window.
Select [1] or [2] for each group of two channels.
Note
On a 4K format logical switcher, the DME function
cannot be used.
Frame memory source settings
Click/tap [Select] for [FM Source (ch)] to display the
pop-up window.
Select [1] or [2] for the two systems.
Frame memory output settings
Click/tap [Select] for [FM (ch)] to display the pop-up
window.
Select [1] or [2] for each group of four channels. Select
both [1] and [2] to share on logical switchers 1 and 2.
Note
In 4K format, the resources for the four channels are
used as frame memory outputs for one channel. On a
4K format logical switcher, set an even number of
frame memory output channels (2 or 4 channels).
Color background settings
Click/tap [Select] for [Color Bkgd (ch)] to display the
pop-up window.
Select [1] or [2] for each system. Select both [1] and
[2] to share on logical switchers 1 and 2.
514