Adjustments And Settings On The Display Window; On Display - Sony PC-3000 Operating Instructions Manual

Adjustments and Settings on the Display Window

On Display

Operation
Settings such as the name of the connected equipment or audio level of the
output signal and other adjustments can be done on the display window.
For setting, use the CONTROL button, the arrow buttons and the SET
button on the unit.
Note
The switcher to be set differs depending on the menu item. Please refer to
below.
Items set only on switcher 1
- Setting DEMO mode (DEMO MODE SETTING)
- Using DEMO mode (DEMO MODE)
Items set on each switcher
- Setting the group index number (GP INDEX SETTING)
- Setting the remote control detector (SIRCS RECEIVER)
Items set on desired switcher
- Setting the name of the connected equipment (TITLING)
- Setting the audio output level (AUDIO LEVEL)
- Setting the extension board to be activated (EXB SETTING)
- Adjusting the extension board (EXB CONTROL)
1
Turn on the power.
The preset display appears.
2
Press the CONTROL button.
The CONTROL MENU display appears.
3
Press the > or . button to select the desired item.
4
Press the SET button.
The setting display of each item appears.
5
Press the >, ., ? or / button to set the item.
6
Press the SET button.
The following message appears and the setting is entered.
C o n f i r m e d !
15
(EN)