Triumph Tiger Explorer XR 2017 Service Manual page 715

Tiger Explorer XR Series
6. Position the windscreen support bracket upper mountings to the windscreen pivot bar and secure with the
two fixings and flanged sleeves. Do not fully tighten at this stage.
7. Position the windscreen support bracket lower mounting to the windscreen motor and secure with the fixing.
Tighten the fixing to 5 Nm.
8. Tighten the windscreen support upper mountings to 4 Nm.
Refit the cockpit panels (see Cockpit Panels - Installation).
Refit the windscreen (see Windscreen - Installation).
Reconnect the battery positive, (red) lead first and tighten the terminals to 4.5 Nm.
Refit the rider's seat (see Rider's Seat - Installation).
Instruments - Installation
Headlight
711 of 746
cjlj
1. Fixings
2. Windscreen motor cover
cjlk_1
1. Lower mounting fixing
2. Upper mounting fixings
3. Windscreen support bracket
WARNING
2
1
2
1
3
ELECTRICAL