Tiger Explorer XR Series
5.
Fit the lower fixings (and side reflectors bracket if fitted) and tighten to 5 Nm.
6.
Tighten the fixings at the top of the rear mudguard to 7 Nm.
7.
Attach the seat latch outer cable to the subframe.
8.
Attach the seat latch inner cable to the seat's latch.
9.
Fit the seat latch to the frame and tighten its new fixing to 9 Nm.
Fit the rear panel (see Rear Panel - Installation).
615 of 746
4
chpy_1
1.
Outer cable
2.
Subframe
3.
Fixings
4.
Washers
1.
Fixings
2
chpy
1.
Fixing
2.
Seat latch
3.
Cable
3
1
FRAME / BODYWORK