Triumph Tiger Explorer XR 2017 Service Manual page 180

Tiger Explorer XR Series
8. Fit the side stand and tighten its fixings to 70 Nm.
9. Tighten the upper fixings for the left hand control plate to 18 Nm.
10. Fit the transmission linkage to the gear change mechanism as noted for removal.
11. Fit the pinch bolt and tighten it to 9 Nm.
12. Tighten the upper lock nut (left hand thread) on the gear change linkage to 6 Nm.
13. Check that the lower ball joint is facing the pivot for the gear change pedal and is not twisted to one side.
14. If the gear change pedal has been removed, align the punch mark on the pedal to the punch mark on the
pivot for the gear change pedal.
15. Push the gear change pedal fully on, fit the pinch bolt and tighten to 9 Nm.
176 of 746
1
2
chme
1. Fixings
2. Side stand
1
4
chmh
1. Pinch bolt
2. Transmission linkage
3. Gear change mechanism
4. Punch mark
1
3
2
TRANSMISSION