Triumph Tiger Explorer XR 2017 Service Manual page 323

Tiger Explorer XR Series
Remove the fuel tank (see Fuel Tank - Removal).
1. Disconnect the multiplug from the air temperature sensor.
2. Release the fixing and remove the sensor from the airbox.
Intake Air Temperature Sensor - Installation
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
1. Fit the air temperature sensor to the airbox and tighten its fixing to 2 Nm.
2. Connect the air temperature sensor multiplug.
Refit the fuel tank (see Fuel Tank - Installation).
Reconnect the battery positive, (red) lead first and tighten the terminals to 4.5 Nm.
Refit the rider's seat (see Rider's Seat - Installation).
Manifold Absolute Pressure (MAP) Sensor - Removal
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
Remove the rider's seat (see Rider's Seat - Removal).
Disconnect the battery, negative (black) lead first.
Remove the fuel tank (see Fuel Tank - Removal).
1. Disconnect the multiplug from the MAP sensor.
2. Release the fixing securing the sensor to the airbox.
3. Raise the sensor, disconnect the air hose and remove the sensor.
319 of 746
1
3
chkb
1. Multiplug
2. Fixing
3. Air temperature sensor
WARNING
WARNING
3
2
4
FUEL SYSTEM / ENGINE MANAGEMENT