Clutch - Triumph Tiger Explorer XR 2017 Service Manual

Tiger Explorer XR Series
Note
the valve guide. Greater resistance is felt at this contact point and further gentle pressure is then
required to locate the seal over the top end of the valve guide.
On application of this pressure, the seal can be felt to positively locate over the top face of the valve
guide. Once correctly positioned, the seal cannot be pushed down any further.
Incorrect fitment of the valve stem oil seals could lead to high oil consumption and blue smoke emissions
from the exhaust system. Do not use excessive force in fitting the seal as this may break the seal ring.
4. Install the valve spring over the valve stem.
5. Compress the valve spring ensuring that the spring is compressed squarely to prevent damage to the valve
stem and cylinder head.
6. Fit the valve collets ensuring correct collet location in the spring retainer and valve as the spring compressor
is released.
Always check for correct location of the valve collets during and after assembly. If not fitted correctly, the
collets may become dislodged when the engine is running allowing the valves to contact the pistons. Any
such valve to piston contact will cause severe engine damage.

Clutch

Exploded View – Clutch Assembly
112 of 746
CAUTION
CAUTION
CLUTCH