Table of Contents
Advertisement
Tiger Explorer XR Series
5.
While holding the innermost friction and steel plates in position, invert the pressure plate and locate it onto
the clutch centre.
6.
Ensure the pressure plate ramps engage correctly with the clutch centre.
Note
Do not allow the clutch centre and pressure plate to separate at this point as this may cause the
innermost steel plate to disengage from the pressure plate splines.
7.
Holding the clutch centre and pressure plate assembly together, invert the assembly and place on a suitable
support. Ensure the assembly rests on the pressure plate and not on the under side of the clutch centre.
135 of 746
1.
Pressure plate
2.
Inner friction plates
3.
Inner steel plate
cjhx
Locating the Pressure Plate
cjhy
1.
Pressure plate ramps
1
CLUTCH
Hide quick links:
Advertisement
Chapters
Table of Contents
