Triumph Tiger Explorer XR 2017 Service Manual page 302

Tiger Explorer XR Series
Fault Code
Pinpoint Tests
Test
1 Check cable and terminal integrity:
- Engine ECM pin A31
2 Check cable for short circuit:
- Engine ECM pin A31 to ground
- Right hand switch housing 8 way
connector pin 4 to ground
3 Check cable continuity:
- Engine ECM pin A31 to right hand
switch housing 8 way connector pin 8
- Alarm pin 1 to right hand switch
housing 8 way connector pin 4
4 Check cruise cancel switch:
- With the twist grip at the throttle
closed position, measure continuity:
- Right hand switch housing 8 way
connector pin 8 to 8 way connector pin
4
5 Reconnect harness, clear fault code
and run engine
Circuit Diagram
Cruise Control Prevented Due to Other Malfunction
298 of 746
Possible Cause
Result
OK
Faulty
OK
Short circuit
OK
Open circuit
OK
Faulty
OK
Fault still present
Action
Disconnect Engine ECM and
proceed to pinpoint test 1:
Action
Disconnect right hand switch housing 8
way connector and proceed to test 2
Rectify fault, proceed to test 5
Proceed to test 3
Locate and rectify wiring fault, proceed
to test 5
Proceed to test 4
Locate and rectify wiring fault, proceed
to test 5
Proceed to test 5
Locate and rectify wiring fault, proceed
to test 5
Action complete - quit test
Contact Triumph service
FUEL SYSTEM / ENGINE MANAGEMENT