Tiger Explorer XR Series
6.
Fit the oxygen sensor harness to the cable tidy. Ensure that the blue tape on the oxygen sensor harness is
positioned as noted for removal.
Note
When fitting the cable tidy, ensure its left hand mounting is aligned correctly to its threaded hole for
the brake line clip.
7.
Attach the cable tidy to the crankcase and tighten its new fixing to 6 Nm.
8.
Carefully remove the cover from the swinging arm's right hand pivot pin.
9.
Using T3880062 - Lock Ring Wrench, 38 mm, remove the locking ring from the right hand pivot pin.
220 of 746
1.
Cable tidy
2.
Flanged sleeves
2
1.
Fixing
2.
Cable tidy
T1052
1.
Cover
1
1
1
2
ENGINE REMOVAL / INSTALLATION