Triumph Tiger Explorer XR 2017 Service Manual page 397

Tiger Explorer XR Series
4. As an assembly, raise the handlebars until clear of the top yoke. Rest the assembly forward of the steering
stem such that access to the headstock top nut and the adjustment nuts is unrestricted. Ensure the master
cylinder remains in an upright position.
5. Loosen the top yoke clamp bolts.
Care must be taken when removing the headstock top nut, to ensure that the top nut and top yoke do not
become scratched. Protect the surfaces with a suitable cloth or tape to prevent scratching.
6. Remove the headstock upper nut.
7. Remove the top yoke and support while detached.
8. Using T3880620 - Adjuster Socket, 48 mm remove the lock nut and tab washer. Discard the tab washer.
393 of 746
chiv_2
1. 10 mm bolts
2. 8 mm bolts
CAUTION
chnr
1. Headstock upper nut
2
1
chno
1
3
FRONT SUSPENSION