Triumph Tiger Explorer XR 2017 Service Manual page 367

Tiger Explorer XR Series
4. Tighten the fixings to 9 Nm.
5. Reconnect the top hose and refit the hose clip using T3880207 - Pliers, Hose Clip.
Refit the throttle bodies (see Throttle Bodies/Injectors - Installation).
Refill the cooling system (see Coolant Replacement).
Reconnect the battery positive, (red) lead first and tighten the terminals to 4.5 Nm.
Refit the rider's seat (see Rider's Seat - Installation).
Radiator - Removal
Radiator - Inspection
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
Remove the rider's seat (see Rider's Seat - Removal).
Disconnect the battery, negative (black) lead first.
Remove the fuel tank (see Fuel Tank - Removal).
Drain the coolant (see Coolant Replacement).
Note
Note the orientation of the clips for installation.
1. Disconnect the expansion tank, right hand and left hand hoses at the radiator.
363 of 746
2
chim
1. Thermostat housing
2. Fixings
WARNING
2
1
2
1
COOLING