Triumph Tiger Explorer XR 2017 Service Manual page 529

Tiger Explorer XR Series
Test
- Connect a suitable voltage supply
between 10 V and 16 V between ABS
ECM connector pin 36 (positive) and
pin 37 (negative), and measure the
current consumption of the wheel
speed sensor
9 Reconnect ABS ECM harness, clear
fault code and test ABS to verify fault
cleared
Circuit Diagram
Wheel speed sensor current consumption data under typical conditions:
Supply Voltage
10 - 16 V
Fault Code
Rear wheel sensor short circuit to
ground or open circuit
Pinpoint Tests
Test
1 Check cable and terminal integrity:
- ABS ECM connector pin 29 and ABS
ECM connector pin 30
2 Check cable for short circuit:
525 of 746
Result
Faulty
OK
Fault still present
Min
5.9 mA
Possible Cause
Rear wheel sensor short circuit to
ground or open circuit
Result
OK
Faulty
OK
Action
Replace the wheel speed sensor,
proceed to test 9
Action complete - quit test
Contact Triumph service
Typical
7.0 mA
Action
Ensure wheel speed sensor
connector is secure
Disconnect ABS ECM connector
and proceed to pinpoint test 1:
Action
Proceed to test 2
Rectify fault, proceed to test 9
Proceed to test 4
Max
16.8 mA
BRAKES