Triumph Tiger Explorer XR 2017 Service Manual page 128

Tiger Explorer XR Series
Position the handlebar end weight, handguard and spacer to the handlebar and secure with new fixings.
Tighten the new handguard to bracket fixing to 6 Nm.
Tighten the new handlebar end fixing to 5 Nm
Bleed the clutch (see Bleeding the Clutch) and then examine the system for correct clutch operation and for
any fluid leakage.
Clutch Slave Cylinder - Removal
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
If the clutch slave cylinder is found to be leaking, the engine oil must be replaced after repairs to the clutch
slave cylinder have been carried out. Contamination of the engine oil with brake and clutch fluid may result in
damage to engine and clutch components.
124 of 746
2
cis v_1
1. Fixing
2. Clutch master cylinder clamp
3. Switch housing
3
1
1. Handguard
2. Handlebar end fixing
3. Handguard to bracket fixing
WARNING
CAUTION
1
2
CLUTCH