Triumph Tiger Explorer XR 2017 Service Manual page 570

Tiger Explorer XR Series
1. To refit the passenger seat, reconnect the heated seat's electrical connector (if equipped), engage the seat's
two outer brackets under the loops on the subframe and the two inner brackets to the brackets on the rider's
seat. Gently push the seat forwards and press down at the rear to engage in the seat lock.
To prevent detachment of the seat during riding, after fitting always grasp the seat and pull firmly upwards. If
the seat is not correctly secured, it will detach from the lock. A loose or detached seat could cause loss of
motorcycle control and an accident.
Rider's Seat - Removal
Rider's Seat - Installation
To prevent damage to the seats or seat covers, care must be taken not to drop the seats. Do not lean the
566 of 746
1. Seat lock
3
1
chdj_1
1. Rear seat outer brackets
2. Subframe loops
3. Rear seat inner brackets
4. Rider seat brackets
WARNING
CAUTION
1
4
2
FRAME / BODYWORK